Hydraulic Cylinders

In tune with our commitment to adhere to high Quality standards, we have gained expertise in the manufacture of hydraulic cylinders, manufactured under the brand name Precise.

Our unmatched range of hydraulic cylinders are manufactured with the following constructions:

  • Tie rod
  • Welded
  • Threaded
  • Block / Clamp cylinders 

Whether it is the standard tie rod or welded hydraulic cylinders or the custom – built threaded and block / Clamp hydraulic cylinders, we stick to our high Quality Standards and ensure that only imported sealing and guidance systems are always used.

All our honed tubes are micro finished to a Ra value of less than 0.3 microns. We also have the capability and expertise to supply cylinders with imported honed tubes to suit our customer’s specifications. Additionally, our piston rods are ground and hard chrome plated. All this is backed up with a warranty period of 12 months, which is a testimonial to our expertise in the manufacture of hydraulic cylinders.

The salient features of our Hydraulic Cylinders include

  • Honed Tube: All the tubes are micro honed for superior surface finish with Ra value less than 0.3 microns.
  • Piston rod: En – 8 to En – 353 are ground and hard chrome plated with 25 microns minimum plating thickness.
  • Piston: Single piece design to accommodate low friction seals.
  • End covers: Accurately machined cast iron / mild steel plates.
  • Sealing systems: Low friction seals with operating Pressures upto 80 mpa from BUSAK and SHAMBAN.
  • Guidance systems: Turcite / Phosphor bronze bushings to ensure positive guidance.

 

 

 

| Home | About Us | Trade Wing | Our Clients | Contact Us | Useful Links |
| Hydraulic Press | Hydraulic Power Packs | Hydraulic Cylinders | Manifold Blocks | Material Handling Equipment | Hydraulic SPM |
© 2005. All Right Reserved. Powered by Nissi Infotech. Site Best viewed in 1024 x 768 setting.